Checking Synchronization Between Antennas - Panasonic WX-SA250P Operating Instructions Manual

Antenna location

Checking synchronization between antennas

If you click the "Antenna location complete" button and there are no problems with antenna placement, the "Mic location/
analysis" screen is displayed and synchronization between antennas will be checked.
Which area's antenna is used as the main (reference) to synchronize for each area is displayed at the bottom of the area. In the
example below, WX-SR200P Area1 is the main antenna, and is synchronized with Area2 and Area3, so it is displayed as "Sync
area1".
The reception strength from the main (reference) antenna is also displayed as the color of the antenna. The display settings are
as follows.
(Green) : Displayed in green if it is sufficiently within the coverage area of the main (reference) antenna.
Try to synchronize the antennas within this display color range.
(Orange) : Displayed in orange if the location is far from the main (reference) antenna.
For this display color, increase the field selection of the main (reference) antenna or change the antenna
location.
(Red) : Displayed in red if out of range of the main (reference) antenna.
The display of antennas that do not affect synchronization between antennas, such as the main (reference) or WX-SR200P
system antennas, remains at the default display (displayed during antenna placement).
37