Mi
Solar Monitor
-ISO
SNMP
RELAY CONTROL PAGE
Admin and admin or admin and user defined password to access
Relay 4 and 5 can be controlled to the on/off status and will keep their positions,
Relay 1 to 3 can only be toggled for 10 second periods and is typically used to reset
radios or routers without logging yourself out completely from the remote site after a
relay was accidently switched , relay 1 to 3 will return automatically after 10 seconds
to the off position. Names can be assigned to relays to help the user remember what
is connected to the relays in the field.
Relays can also be activated via SNMP SET Commands over Ethernet.
9 |
P a g e
Need help?
Do you have a question about the Solar Monitor-ISO SNMP and is the answer not in the manual?