Climate Control System - Honda CIVIC 2022 Manual

Climate Control System

Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side
temperature control dial.
3. Press the (ON/OFF) button to cancel.
Left-hand Drive Type
AUTO Button
a
Driver's Side Temperature Control
b
Dial
Fan Control Dial
c
Passenger's Side Temperature Control
d
Dial
SYNC Button
e
A/C (Air Conditioning) Button
f
ON/OFF Button
g
* Not available on all models
*
MODE Control Button
h
• Dashboard vents
• Dashboard and floor vents
• Floor vents
• Floor and windscreen
demister vents
Recirculation Button
i
1Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The auto button indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
During idle-stops, air-conditioning is suspended, and
only the blower remains active.
If you do not want air-conditioning suspended, press
the Auto Idle Stop OFF button to cancel idle-stop.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Pressing the button switches the climate control
system between on and off. When turned on, the
system returns to your last selection.
Continued 229