Auto High-Beam - Honda CIVIC 2022 Manual

Auto High-Beam

The front wide view camera detects the light sources ahead of the vehicle such as
the lights of a preceding or oncoming vehicle, or street lights. When you are driving
at night, the system automatically switches the headlights between low beam and
high beam depending on the situation.
■
How to Use the Auto High-Beam
■
Activating the system
When all of the following conditions have been met, the auto high-beam indicator
comes on and between the high beam and low beam switches automatically
depending on the situation.
Light Switch
a
Auto High-Beam Indicator
b
• The power mode is in ON.
• The light switch is in AUTO.
• The lever is in the low beam position.
• The headlights have been automatically
activated.
• It is dark outside the vehicle.
uuOperating the Switches Around the Steering WheeluAuto High-Beam
1Auto High-Beam
The auto high-beam system does not always operate
in every situation. This system is just for assisting the
driver. Always observe your surroundings and switch
the headlights between high beam and low beam
manually if necessary.
The range and the distance at which the camera can
recognise varies depending on conditions
surrounding your vehicle.
Regarding the handling of the camera mounted to
the inside of the windscreen, refer to the following.
2 Front Wide View Camera P. 489
For the auto high-beam to work properly:
•
Do not place an object that reflects light on the
dashboard.
•
Keep the windscreen around the camera clean.
When cleaning the windscreen, be careful not to
apply windscreen cleanser to the camera lens.
•
Do not attach an object, sticker or film to the area
around the camera.
•
Do not touch the camera lens.
If the camera receives a strong impact, or repairing of
the area near the camera is required, consult a dealer.
How to turn off the Auto High-Beam System
You can change the auto high-beam system on and
off.
2 Customized Features P. 295
Continued 191