Product Overview
1. Attachment adapter
2. Locking lever
3. Lift arm
Operation
Restraining the Side-to-Side
Pivot
As installed, the drag-mat carrier pivots side to side when you
turn corners to better follow the traction unit and protect
the edges of the drag mat. To follow a line or straight edges,
install a clevis pin, washer, and hairpin cotter through the
pivot assembly as shown in
Figure
12.
Figure 11
4. Drag-mat carrier
5. Mat retainer
6. Drag mat
1. Clevis pin
2. Drag-mat carrier
3. Washer
Note: Using this restrained position for operation other than
a straight line is not recommended. The pin should only be
installed to follow lines or straight edges. In most conditions,
8
Figure 12
4. Hairpin cotter
5. Pivot assembly