Using An External Flash - FujiFilm X-T4 Owner's Manual

Using an External Flash

To adjust settings for a fl ash unit mounted on the hot shoe or
connected via the sync terminal:
1 Connect the unit to the camera.
2
In shooting mode, select FLASH
FUNCTION SETTING in the F (FLASH
SETTING) menu tab. The options
available vary with the fl ash unit.
Menu Menu
Displayed when an optional EF-X8 fl ash unit is mounted
EF-X8
on the hot shoe and raised.
Adjust settings for fl ash units connected via the sync
SYNC terminal. SYNC TERMINAL is displayed if the EF-X8 is
TERMINAL lowered and either no fl ash unit, or an incompatible fl ash
unit, is mounted on the hot shoe.
SHOE MOUNT Displayed when an optional fl ash unit other than the
FLASH EF-X8 is mounted on the hot shoe and turned on.
Displayed if an optional fl ash unit functioning as a master
MASTER
fl ash for Fujifi lm optical wireless remote fl ash control is
(OPTICAL)
connected and turned on.
3 Highlight items using the selector
and rotate the rear command dial to
change the highlighted setting.
4
Press DISP/BACK to put the changes into eff ect.
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
Description Description
MODE
External Flash Units
EXIT
P P
268
270
271
274
EF-X8
ADJUST END
267
10