Chicco 06867 M Instructions Manual page 43

cable or the device to unplug the appliance from the
mains socket.
• Check that the power cable plug is always unplugged
from the mains socket and that the bottle warmer is
cold before moving it, cleaning it, storing it, doing
maintenance work or in between warming cycles.
• The cleaning and maintenance to be performed by
the user must not be carried out by children and/or
people with reduced mental capabilities or lacking
experience or the required knowledge.
• Never immerse or wet the plug, bottle warmer or
power cable in water or other liquids.
• Do not attempt to open or repair the device. The
bottle warmer can only be opened with special
tools. The power cable must only be replaced with
another identical power cable to the one supplied
with the appliance; this operation must only be per-
formed by expert technicians or by Artsana S.p.A.
• The device is preset with the maximum bottle
warming time. It is important not to repeat the cycle
with the same bottle or jar and, in general, it is not
advisable to heat food too long.
• At the end of the bottle heating cycle, before feed-
ing the heated milk to the baby, check that the tem-
perature is not too high by pouring a drop of milk
on the back of your hand.
• At the end of the jar heating cycle, before feeding
the heated food to the baby, check that the temper-
ature is not too high by tasting it with a teaspoon.
43