Advertisement
Rotating
1. Use the left/exposure and right/colour buttons to highlight the rotate 90° clockwise/
anti-clockwise icons.
2. Press the OK/capture button to select either icon to rotate the image clockwise/
anti-clockwise.
3. Once rotated as desired, use the left/exposure button to highlight the save icon.
Press the OK/capture button to save the image. The scanner will then return to the
live view.
Note:
If you do not want to save the image, use the left/exposure and right/colour
buttons to highlight the cancel icon. Press the OK/capture button to cancel and
return to the live view.
Full SD card
Once the SD card is full, a full icon will appear on the
display and no additional images can be saved. To
continue capturing and saving images, there are two
methods:
• Transfer the saved images into a PC using USB mode.
• Turn off the scanner and remove the SD card. Replace
with a different SD card.
Playback mode
In this mode, you can view, rotate, and delete
saved images. Press the playback button to
enter this mode.
• Once entered, the scanner will enter an
automatic slideshow transitioning every
two seconds to show all saved images.
This is indicated by the indicator in the top
left corner.
• Press the playback button again to return to the live view.
Pausing and manual control of the slideshow
• To pause the slideshow, press the mode or OK/capture button. This will allow for
manual control of the slideshow. Press the left/exposure and right/colour buttons to
view saved images.
• To return to the automatic slideshow, press the OK/capture button.
Indicator
17
Advertisement
