Advertisement
Scanning slide and negative films
1. Ensure the slide or negative film is inserted fully into the correct film holder and
placed into the slide slot. Insert the backlight holder into the scanner.
2. Press the power button to turn on the scanner, then press the mode button.
3. Ensure the media type set matches that inserted into the scanner. Press the
OK/capture button to scan.
You may either press the playback button or press the power button to turn off the
scanner and remove the SD card to view scanned images. The images can also be
transferred to a PC using USB mode.
Scanning photos and business cards
1. Ensure the photo/card holder is fully inserted. Ensure the slide/negative film holders,
and backlight holder are removed. Press the power button to turn on the scanner,
then press the mode button.
2. Ensure the media type set matches that inserted into the scanner. Press the
OK/capture button to scan.
Reformat SD card
The SD card used must be in the FAT format. If the SD card needs to be reformatted:
1. In the settings mode, use the left/exposure and right/colour buttons to navigate to
the SD card format icon. Press the OK/capture button to select. This will open a
sub-menu to confirm reformatting.
2. Use the left/exposure and right/colour buttons to navigate to the ticked checkbox
icon and press the OK/capture button to confirm.
15
Advertisement
