Advertisement
USB mode
This mode allows the scanner to transfer saved/scanned images on the SD card into a PC.
1. Connect the USB cable into the USB port on the scanner and your PC.
2. In the settings mode, use the left/exposure and right/colour buttons to navigate to
the USB mode icon. Press the OK/capture button to select. The display will show a
USB icon confirming this mode.
3. Transfer the images from the SD card to the PC.
TV output
Using this function allows your TV to be used as the display
instead of the scanner.
1. Connect the black connector of the video cable into the TV
output port on the rear of the scanner. Connect the yellow
connector of the cable into your TV.
2. In the settings mode, use the left/exposure and right/colour
buttons to navigate to the TV output icon. Press the
OK/capture button to select. This will open a
sub-menu.
3. Use the left/exposure and right/colour buttons to navigate
to 'PAL', then press the OK/capture button to select. The
TV will now act as the display for the scanner.
Power saving mode
Activating this mode will turn off the scanner after three minutes of non-use.
• In the settings mode, use the left/exposure and right/colour buttons to navigate to
the power saving mode icon. Press the OK/capture button to activate the mode. The
scanner will display the power-saving mode icon when activated.
Capture mode
When in live view mode, press the OK/capture button and wait for 2–3 seconds to select an
image and enter capture mode. In this mode, the image on the display can be saved and
rotated.
16
Save
Rotate 90°
Rotate 90°
anti-clockwise
clockwise
Selected
image
Cancel
Advertisement
