Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KASCNCMB51B
Summary of Contents for Kogan KASCNCMB51B
- Page 1 5-IN-1 COMBO SCANNER KASCNCMB51B...
-
Page 2: Table Of Contents
Safety & Warnings Components Overview Preparation Before Use Operation Cleaning & Care Troubleshooting... -
Page 3: Safety & Warnings
• Do not expose this scanner to heat sources (for example, stoves, radiators). • Do not block the openings of the scanner. • Do not attempt to disassemble the scanner yourself. • If damaged, stop use immediately and contact help.Kogan.com for assistance. • Ensure the scanner is unplugged when not in use. -
Page 4: Components
COMPONENTS A Combo scanner B Slide film holder C Negative film holder D Backlight holder E Photo/card holder F Card cover G Video cable H USB cable I Power adapter J Cleaning brush K User guide... -
Page 5: Overview
OVERVIEW Front view Control panel Power status SD card slot Display Slide slot Photo/card holder slot Back view Backlight holder slot Power port USB port TV output port... - Page 6 Control panel Power button Playback button Up/mirror Mode button button Left/exposure OK/capture button button Right/colour button Down/flip button...
-
Page 7: Preparation
PREPARATION Note: Ensure all negative films, slides, film holders, and photos are free of dust and dirt before inserting them into the scanner, as this may affect the image quality when scanning. Slide film 1. Open the slide film 2. Place the slide film into 3. - Page 8 Photos 1. Remove any film holders from the scanner by sliding them out on the left side. If the backlight holder is inserted, press down on the handle and pull it out of the scanner. 2. Open the photo/card holder. Aligning with the base of the holder, place your photo inside.
- Page 9 Business cards 1. Remove the slide/negative film holders, and backlight holder from the scanner. 2. Open the photo/card holder. Aligning with the guidelines in the centre of the holder, place the card inside. 3. Place the card cover over the photo/card holder, then close the holder.
-
Page 10: Before Use
BEFORE USE SD card This scanner requires an SD card to store saved images. Insert a FAT formatted SD card (not supplied, maximum 32GB) into the SD card slot. For slide and negative films: Insert the slide or negative film into the slide slot. Insert the backlight holder into the backlight holder slot. -
Page 11: Operation
OPERATION Placement Place the scanner on a stable, dry, level surface. Powering on/off • Plug the ends of the power adapter into the power port on the scanner and a socket. • Turn the socket on and press the power button to turn on the scanner. •... - Page 12 Flipping Flipping may be needed if film is placed upside down. To flip images, press the down/flip button. Press the OK/capture button to save and exit. Exposure The exposure can be adjusted with a range between –3 to 3. 1. Press the left/exposure button. 2.
- Page 13 Colour balance The RGB levels can be adjusted with a range between –3 to 3. 1. Press the right/colour button. 2. Press the up/mirror and down/flip buttons to adjust the level of redness. 3. Press the left/exposure and right/colour buttons to switch between adjusting the red, green, and blue levels.
- Page 14 Settings mode From the live view mode, press the mode button to enter the settings mode. Various settings can be adjusted. Media type Power saving mode USB mode Reformat SD card output Media type This is used to select the type of media inserted (negative film, slide film, B&W negative film, photo, card).
- Page 15 Scanning slide and negative films 1. Ensure the slide or negative film is inserted fully into the correct film holder and placed into the slide slot. Insert the backlight holder into the scanner. 2. Press the power button to turn on the scanner, then press the mode button. 3.
- Page 16 USB mode This mode allows the scanner to transfer saved/scanned images on the SD card into a PC. 1. Connect the USB cable into the USB port on the scanner and your PC. 2. In the settings mode, use the left/exposure and right/colour buttons to navigate to the USB mode icon.
- Page 17 Rotating 1. Use the left/exposure and right/colour buttons to highlight the rotate 90° clockwise/ anti-clockwise icons. 2. Press the OK/capture button to select either icon to rotate the image clockwise/ anti-clockwise. 3. Once rotated as desired, use the left/exposure button to highlight the save icon. Press the OK/capture button to save the image.
- Page 18 Rotating and deleting When in manual control of the slideshow, press the mode button to open a menu that allows saved images to be rotated and deleted. • Use the left/exposure and right/colour buttons to highlight the rotate 90° clockwise/ anti-clockwise icons.
-
Page 19: Cleaning & Care
CLEANING & CARE Ensure the scanner is turned off and unplugged before cleaning. • Use a clean, dry, non-alcohol cotton swab or an additive-free lens tissue to clean the glass surfaces on the backlight holder and card cover. This should be performed periodically to produce clear images. - Page 20 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...