Using The External Hdd (Usb Hdd) - Panasonic DMR-UBS90 Operating Instructions Manual

Using the external
HDD (USB HDD)
§
"For recorded programmes (
§
If you intend to move recorded programmes to a
USB HDD, the USB HDD must be registered to
this unit first.
Limitation information
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit. If you have already registered eight
USB HDDs, it will be necessary to delete one or
more of them before registering a new
USB HDD.
• Registered USB HDDs cannot be used with
devices other than this unit.
Regarding the external HDD (USB HDD)
• Certain non-confirmed USB HDDs cannot be
used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Connecting the USB HDD
Connect this unit with optional USB HDD.
e.g., [UBC90]
• Only one USB HDD (For recorded
programmes, 27) can be connected.
• The USB HDD can be connected to the USB
port on the rear of this unit.
46
TQBS0033
27)" only
This unit's rear panel
USB HDD
Registering the USB HDD
• If the registering screen appears when
connecting the USB HDD, go to step 5.
1
Press [FUNCTION MENU].
2
Select "Basic Settings" in "Setup", then press
[OK].
3
Select "Settings for USB HDD" in "HDD /
Disc / USB HDD", then press [OK].
4
Select "USB HDD Registration", then press
[OK].
5
Select "Yes", then press [OK].
6
When the registering is complete, message
screen appears.
Press [OK].
7
The confirmation screen appears.
Press [OK].
To cancel all USB HDD registrations (
• It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
• You can check the registration number of the USB HDD on
the Video Menu. ( 47)
Disconnecting the USB HDD
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
Press [FUNCTION MENU].
2
Select "Basic Settings" in "Setup", then press
[OK].
3
Select "Settings for USB HDD" in "HDD /
Disc / USB HDD", then press [OK].
4
Select "USB HDD Disconnection", then
press [OK].
5
Select "Yes", then press [OK].
6
Disconnect the USB HDD from this unit.
94)