Panasonic DMR-UBS90 Operating Instructions Manual page 23

Then follow the on-screen instructions and apply
the settings.
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
- If your Network name is not displayed, search
again by pressing the red button on the remote
control.
- Stealth SSID will not be displayed. Enter
§2
manually by using "Wireless Settings". (
• If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Press the green button on the remote control.
2 Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
of Wireless router.
3 Press [OK].
e.g.,
3
※
To restart Easy Network Setting
1 Press [FUNCTION MENU]. (
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Easy Network Setting" in "Network",
then press [OK].
To redo settings individually
If "Easy Network Setting" did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [FUNCTION MENU]. (
2 Select "Basic Settings" in "Setup", then press
3 Select "Network Settings" in "Network", then
4 Refer to "Network Settings". (
98)
Check security before using Home Network
function
If you set "Home Network function" to "On", all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorised access.
• Refer to the operating instructions of the hub or router.
• If you set "Home Network function" or "TV Anywhere" to
"On", the setting for "Quick Start" is fixed to "On".
• Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
• After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
Wireless
• Please be aware that connecting to a network without
router
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
§1
29)
§2
§3
[OK].
press [OK].
SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Depending on the settings of the wireless router, its SSID
may not be found. For details, refer to the operating
instructions for the wireless router.
The wireless router compatible with Wi-Fi Protected
Setup TM may have the mark.
29)
98)
23
TQBS0033