Access Point Label - NETGEAR WAX615 User Manual

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
functions at 2.5 Gbps. Otherwise, the Internet connection functions at 1 Gbps, which
is a common speed.
For more information about the LAN/PoE+ port connection, see Set up and connect
the access point to your network on page 20.
• Reset button: You can use the Reset button to restart the access point or to reset
the access point to its factory default settings. To restart the access point, press the
Reset button for about two seconds. To reset the access point to factory default
settings, press the Reset button for 10 seconds or longer.
Note: If you added the access point to a NETGEAR Insight network location, you
must first use the Insight app or Insight Cloud portal to remove the access point from
your Insight network location before the factory default settings function of the Reset
button is available. For more information, see Use the Reset button to reset the
access point on page 156.

Access point label

The access point label on the bottom panel shows the QR code, serial number, MAC
address, default WiFi network name (SSID), and network key (password) of the access
point.
Figure 3. Access point label location
Hardware Overview 14 User Manual