Dismantling And Scrapping - Tarmo TAR025 Instruction Manual

DISMANTLING AND SCRAPPING

Before parts removal or replacement the machine shall be lowered securely on the ground,
make sure there is no pressure in the hydraulic system, turn off the drive and the tractor
engine, engage the parking brake on the tractor and remove the ignition keys.
Dismantling does not require any special equipment. Worn, disassembled parts should be
scrapped. Follow the safety instructions and procedures for disassembly of hydraulic
equipment to prevent environmental contamination during scrapping. All parts of the
machine must be segregated and subjected to proper disposal.
25