Technical Data; Product Description; Prior To Use - Tarmo TAR025 Instruction Manual

Other information about safety signs:
- Information about the sign location on the machine are given in the description of the
sign.
- The signs should always be legible and clear, visible for staff and for those who may go
near the log grapple.
- If any sign loses legibility or has been lost, replace it with a new one.
- All replaced elements in the log grapple and associated with repairs, which have labelled
safety signs should be provided with these signs.
- To purchase safety signs, contact your dealer or the manufacturer.
CAUTION:
The log grapple is a rather safe device. However, each user should be fully aware of the
existing hazards and should know how to avoid these risks. When the log grapple is used,
the precautions associated with the use of a tractor, as well as the entire set should be
taken into account.

TECHNICAL DATA

Distance between open arms
Transport width
Height
Length
Machine weight
Operating speed
Transport speed
Nominal pressure in hydraulic system

PRODUCT DESCRIPTION

This log grapple is designed only to transport of logs. It can be used in agriculture, forestry
and municipal economy. The log grapple with three-point linkage consists of a suspension, a
rotatable main frame and hydraulic grapple arms. The suspension system enables
aggregation of the machine with a tractor.

PRIOR TO USE

The log grapple is shipped completely assembled.
Transportation
- Raise the machine by three point linkage to transport position, at least 250 mm above the
ground.
- Check that the log grapple does not touch the tractor wheels; it may cause damage to
tyres.
- It is forbidden to open the grapple arms during transport.
- Travelling speed on public roads must be adapted to type and condition of surface. The
following travelling speeds are recommended:
- on smooth surfaces – up to 20 km/h,
1700 mm
960 mm
1500 mm
1700 mm
365 kg
15 km/h
20 km/h
16 MPa
22