Panasonic VIERA Link SC-ZT2EE Service Manual page 95

10.4.15. Disassembly of Antenna Wire
• Refer to "Disassembly of Woofer Block".
• Refer to (Step 1) - (Step 2) of "Disassembly of Arm Unit".
• Refer to "Disassembly of Prepared Net Assembly".
• Refer to (Step 1) - (Step 2) of "Disassembly of Antenna Cover Assembly".
Step 1 : Detach the Wire Protector from the Pipe Assembly and remove it from the wires.
Caution : During assembling of the Wire Protector, align the Wire Protector's locator to the Pipe Assembly's locator hole
and ensure that the Wire Protector is properly fitted onto the Pipe Assembly.
95