Panasonic VIERA Link SC-ZT2EE Service Manual page 38

10.3.2. Disassembly of HDMI P.C.B.
• Refer to "Disassembly of Top Cabinet".
Step 1 : Remove 2 screws.
Step 2 : Remove 3 screws.
Step 3 : Detach 15P FFC at the connector (CN2003) on the
HDMI P.C.B.
Step 4 : Detach 16P FFC at the connector (CN2004) on the
HDMI P.C.B.
Step 5 : Detach 7P cable at the connector (CN2005) on the
HDMI P.C.B.
Step 6 : Lift up to remove the HDMI P.C.B. and the HDMI Sup-
port Chassis as arrow shown.
Caution : During assembling of the HDMI P.C.B., ensure
that the HDMI Support Chassis is properly catched onto
the Rear Panel.
Step 7 : Remove 2 screws.
Caution : During assembling, ensure the HDMI P.C.B. is
seated properly on the locators of the HDMI Support Chas-
sis.
38