Panasonic VIERA Link SC-ZT2EE Service Manual page 80

Step 2 : Flip and place the D-Amp P.C.B. as arrow shown.
Step 3 : Using a Jig (RFKZ0535), hook on to detach coaxial cable at the connector (U18) on the RX Module P.C.B.
Caution : The connector (U18) is fragile, take extra care not to damage it during disassembling.
Step 4 : Release catches on the P.C.B. Holders as arrows shown.
Step 5 : Apply gentle force to detach RX Module P.C.B. at the P.C.B. connector (CN6501).
Caution : Ensure that the RX Module P.C.B. is properly and fully inserted onto the P.C.B. connector (CN6501) when assem-
bling.
80