General Information; Laws, Codes, And Regulations; Inspect For Shipping Damage - Cleveland SteamChef 22CET6.1 Installation Manual

CHAPTER 2 GENERAL INFORMATION
A. Laws, Codes, and Regulations
This equipment should be installed only by qualified, professional plumbers, pipe fitters, and
electricians.
1. The installation of this appliance must conform with:
a. The National Electrical Code, ANSI/NFPA 70 (latest edition), or the Canadian Electrical
Code, CSA C22.2, or local codes, as applicable.
When installed, the appliance must be electrically grounded in accordance with the
•
above.
NOTE: This appliance is not GFI (GFCI) compatible.
•
b. The Food Code (latest edition) of the Food and Drug Administration (FDA).
2. This equipment is to be installed to comply with the applicable federal, state, or local plumbing
codes.
3. Installation instructions must be read in their entirety before starting installation of this
appliance.
4. Install this appliance according to the policies and procedures outlined in this manual.
5. Installation must comply with all local fire and health codes.
Improper installation, adjustment, alteration, service, or maintenance of this appliance, or installation of
a damaged appliance can result in DEATH, INJURY, EQUIPMENT DAMAGE, and void the warranty.
NEVER install damaged appliances, equipment, or accessories.
ALWAYS have installation and service performed by qualified Cleveland Range authorized personnel.
B. Inspect for Shipping Damage
If the appliance is damaged or damage is suspected:
•
1. Submit a Damage Claim to the Shipper immediately.
2. Inform your dealer at once.
3. Inform Cleveland Range in writing within three (3) days.
2