IBEX TM67C Quick Start Manual page 3

QUICK START GUIDE
drive components may occur. If the engine stalls when turning on the
PTO, keep turning it on until drums get up to speed.
 DO: replace blades regularly to ensure a sharp cut.
 Failing to heed these warnings may cause damage to the machine.
 The machine is shipped with oil in the gearboxes. Double-check the oil
level and top off before each use. Use an extreme pressure (EP) gear
oil near 90 weight (80w90 is a common type). See section 6.2 of the
manual for details on lubrication.
 There is no drain plug for the 90 degree gearbox that is attached to
the 3 point hitch frame. An oil suction pump is recommended to
remove oil when changing it at the beginning of each season.
2021-1.1 IBEX EQUIPMENT CO