General Components BISON 2200A Owner's Manual page 16

Changing Language
The language should be set to English. However, if it
isn't or the control has been reset to default settings
it will revert to Chinese. Please follow these steps to
convert the language to English.
1. Turn on the control with
the power button. Wait for
the symbols to stop
flashing, then press the
power button again.
2. Navigate to the clock
face symbol at the top of
the control by using the
arrow keys. When it is
flashing press both arrow
keys simultaneously.
3. P1 now appears.
4. Press OK and C1 will
appear
5. Keep pressing OK slowly
until '02:oF' appears.
6. Press and of the arrow
keys until the screen
reads '02:on'.
7. Keep pressing OK until
back to the P1 menu
screen.
8. Press power button to
return. The language will
now be set to English.
Changing Date and Time
Manual On / Off
Page 16 of 19
1. To change the date and
time, navigate to the clock
symbol and press OK.
2. Select the current day of the
week using arrow keys and
press OK to confirm.
3. Select the hour using the
arrow keys and press OK to
confirm
4. Select minutes and press OK
to confirm.
5. Once completed, the control
will return to the home screen,
displaying correct time.
NOTE
Disconnecting timer
from the harness
resets the date and
time.
1. To turn the power on
manually, navigate to the
heating icon and press OK
2. The heater will start
automatically
3. Use the arrow keys to adjust
the output of the heater from
high to low (07 to 01
respectively)
4. To switch the heater off,
press the heater button to
return to the home screen.