Operation: Analog Controller; Operation: Digital Timer - General Components BISON 2200A Owner's Manual

Operation: Analog Controller

1
2
3
1. Variable Output Button and Indicator Light
2. Temperature Button and Indicator Light
3. Fan Only (Cold Air) Button and Indicator Light
4. Control Knob
5. Fixing Screw Hole (Located underneath control
knob)
The analog dial controller works by twisting the
control knob to the desired heat setting, and using
the buttons listed to determine the heater's function.
Variable output is simply high to low heat. The
temperature button switches the heater to
thermostatic mode (the heater will then switch to a
cool-down cycle automatically once it has reached
the selected temperature). The fan button only
switches the fan on for cool air.

Operation: Digital Timer

1 A B C
2
4
See legend on top right of this page...
4
5
D E F
3
5
6
Page 15 of 19
1. LCD Screen A. Days of the Week
2. Left Arrow Button B. Heating Symbol
3. Right Arrow Button C. Fan Symbol
4. Power/Back Button D. 'P' (Program) Symbol
5. OK Button E. Clock Symbol
6. Fixing Screw Hole F. Clock Face
Functions
Digital timer can be programmed for 3 different

start times daily on any combination of the 7
days of the week
 7 step variable output mode
Thermostatic mode from 05°C to 35°C

Adjustable cold air fan mode
