Advertisement
Access Camera via NVR
Ensure the camera has been connected, then do the following steps.
Note:The following information takes the camera IP address: 192.168.1.88 as
an example.
1
Click the right mouse button, choose the "Common Menu" and "Network".
Cancel DHCP and enter "IPv4 Address / IPv4 Subnet Mask / IPv4 Default
2
Gateway".
IPv4 Address: 192.168.1.xxx (0-255)
IPv4 Subnet Mask: 255.255.255.0
IPv4 Default Gateway: 192.168.1.1
Noted: The camera is DHCP, when using with NVR, the NVR IP address
needs to be changed to the same network segment as the camera.
4
Advertisement
