Do not use transparencies that
Are coated, such as transparencies designed for most color printers
Have static electricity that will cause them to stick together
Use transparencies that are
Monochrome, uncoated transparencies (also known as OHP film)
General Notes about Media
If you're printing simplex pages, load the media printing-side down in the mul-
tipurpose tray, but printing-side up in the other trays. The top of the sheets of
media should be toward the back of the printer.
Often, an arrow on the media package label indicates the printing side of the
media. If you can't determine which side of the media to print on, remove the
media from the tray, rotate the stack 180°, turn the stack over, and then place
it back in the tray.
Attention
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Trays
Tray
Location
Printer
High-Capacity
Input Feeder
(1x500)
High-Capacity
Input Feeder
(2x500)
Notes:
18
Refer to page 29 for information about the recommended
Q-Media.
Media Tray
Upper (standard) tray
Multipurpose
Optional Tray (1x500)
Optional Tray 1 (2x500)
Optional Tray 2 (2x500)
You may rename these trays for your convenience. See the
Crown Books in PDF on the Software Utilities CD-ROM for
more information.
Media Storage and Handling
Sheet Capacity
for Letter/A4-
sized Media
500
100
500
1,000
(500 sheets each)