Konica Minolta Magicolor 3300 User Manual page 84

Attention
Never spray cleaning solution directly on the printer's surface; the
spray could penetrate through the air vents of the printer and damage
the internal circuits.
Be careful when cleaning the inside or removing paper jams, as the fuser
assembly and other internal parts become very hot. Open the front cover,
and let the interior of the printer cool before handling the inside of the
printer.
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the printer's
interior.
For printer storing and shipping instructions, refer to printer.konicaminolta.net/
support.
How do I clean the density sensor?
The printer's transfer roller contains a density sensor to detect the density of
media passing by. When the sensor gets dirty or dusty, print quality will
degrade. When that happens, use the following instructions to clean the den-
sity sensor.
1
Turn off the printer.
2
Open the front cover (button A)
, .
76
2
Cleaning the Printer
A
1