Dell PowerEdge C8220X Installation Manual page 12

C8220X_MIC5110P7120P_IG.book Page 12 Monday, August 12, 2013 5:42 PM
4
Remove the four M3 screws securing the mounting brackets.
5
Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.
6
Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.
NOTE:
Be careful not to damage the twin axial cable on the back GPGPU card riser
when removing the top cover.
Figure 1-12. Removing the Mounting Brackets and GPGPU Blank
1 M3 screws (4)
3 back mounting bracket
NOTE:
Ensure that the back GPGPU card riser is secured to the sled cover using
the type A screw holes.
7
Align the right air baffle with the screw holes on the back of the sled cover.
8
Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lb.
Figure 1-13. Installing the Right Air Baffle
1 M3 screws (2)
12
Installation Guide
2
1
2 front mounting bracket
4 GPGPU blank
2
1
2 right air baffle
3
4