3.1
Setting the height of the seat
To change the seat height:
Rear seat height: unscrew completely and remove all the 16 screws
•
marked as A on the drawing below, from the adjusting plate attached to
the hand-bike frame.
Change the height of the seat matching the holes both in the plates and
•
the frame.
Put the screw back and tighten it.
•
Front seat height: unscrew completely and remove the B screw from the
•
adjusting plate attached to the hand-bike frame
Change the height of the seat matching the holes in the plates and in the
•
frame.
Put all the screws back and tighten them properly.
•
8