3.3
Setting the back-rest angle
To change the back-rest angle:
• Remove the backrest-inclination screws D or E or both (on both sides)
• Find the desired position aligning the holes on the plate to those on the
seat and backrest tubes
• Put the screws back and tighten carefully all bolts back in place.
3.4
Moving the seat horizontally
It is possible if necessary to move the seat horizontally in the sleighs in order
to make the transfer easier.
Unscrews the thumbs screws F under the seat and move the seat in the
sleighs at the desired position. It is very important to tighten the
thumbscrews carefully again when the user is in the right position to
drive the hand-bike.
10