Table of Contents
Advertisement
III. DAUMIER Watch Operating Instructions
1. Quartz Watch
lti-
Watch Model No: DM9605
Calibration steps that apply to movement model: 9U13
A) DISPLAY
B) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date
may not change the following day.
3. After the date has been set, push the crown back to the normal position.
Hour hand
Second
hand
Minute hand
2nd click position
1st click position
Normal crown
position
Date
7
Advertisement
Table of Contents
