DAUMIER DM9616 User Manual page 23

III. DAUMIER Watch Operating Instructions
3. Automatic Watch
Watch Model No: DM8802, DM8803, DM8807
Calibration steps that apply to movement model: 6T15
A) DISPLAY
B) WINDING THE MAINSPRING
Automatic winding watch can be also manual-winded by turning the crown in normal
crown position. Wind 15 - 20 times clockwise until second hand starts to move naturally.
C) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,second hand begins to run.
D) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Pull the crown from the 1st click position to the 2nd click position, then date advances one day.
3. After the date has been set, push the crown back to the normal position.
22
Hour hand
Second
hand
Minute hand
2nd click position
1st click position
Normal crown
position
Date