Table of Contents
Advertisement
III. DAUMIER Watch Operating Instructions
3. Automatic Watch
Watch Model No: DM8609
Calibration steps that apply to movement model: 9132
A) DISPLAYS AND BUTTONS
B) WINDING THE MAINSPRING
Automatic winding watch can be also manual-winded by turning the crown in "A"
position.Wind 15 20 times clockwise until second hand starts to move naturally.
C) ADJUSTING DATE
Adjust the date by rotating the crown clockwise in "B" position.
D) ADJUSTING TIME
Rotate the crown in "C" position and adjust the standard time.
Then check if it is morning or afternoon and adjust correctly.
E) POWER RESERVE DISPLAY
Illustrate the power reserved in the automatic movement. The energy indicator will
change due to winding the mainspring.
When the energy indicator points to "(F) 40" represents that the movement's reserve
energy is full; the energy indicator points to "(E) 0" indicates that the power reserve
in movement is zero, winding is needed in order to maintain the normal running of
the watch.
Power reserve display
Hour hand
Second hand
24 Hour hand
Minute hand
Date adjusting
8
A
B
C
Time adjusting
Mainspring winding
Date display
29
Advertisement
Table of Contents
