DAUMIER DM9616 User Manual page 27

III. DAUMIER Watch Operating Instructions
3. Automatic Watch
Watch Model No: DM8615
Calibration steps that apply to movement model: 8217
A) DISPLAYS AND BUTTONS
B) WINDING THE MAINSPRING
Automatic winding watch can also be hand winded by turning the crown clockwise
in normal position. Wind several times clockwise. It will start to move naturally.
C) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the normal position.
*24 hour hand moves linked with the center hour and minute hand.
D) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM to 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the crown back to the normal position.
26
Hour hand
24 Hour hand
Second
hand
Minute hand
24
8
12
Normal crown
position
2st click position
1st click position