DAUMIER DM9616 User Manual page 28

III. DAUMIER Watch Operating Instructions
3. Automatic Watch
Watch Model No: DM-JLW004B, DM-JLW015B
Calibration steps that apply to movement model: 8218
A) DISPLAY
Hour hand
B) WINDING THE MAINSPRING
Automatic winding watch can also be hand winded by turning the crown clockwise in
normal crown position. Wind several times clockwise. It will start to move naturally.
C) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2.Turn the crown to set hour and minute hands.
3.After the time has been set, push the crown back to the Normal position
D) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the crown back to the normal position.
Second
hand
Minute hand
1st click position
2nd click position
Normal crown
position
Date
27