ICA cook&seat KP-508WGH Manual page 22

TECHNICAL DATA
Model: KP-508WGH. Voltage: 220–240 V ~ 50 Hz.
Power: 600 W.
GENERAL DESCRIPTION
USE:
1. Put the food you want to mix into the jug.
2. Put the lid onto the jug and close it securely.
Put the measuring cup into the hole in the lid
and then turn it clockwise until the measuring
cup is fully locked.
3. Start the motor base.
SPEED – USE:
1-4 for basic use with liquids
5 for a more solid consistency – to mix
liquids and solid food
0 Stop
P Pulse and ice-crushing button to crush
ice and for short, powerful impulses.
(You cannot set the switch to 'PULSE'.
You have to hold the switch in the
'PULSE' setting if you want to use pulse
more than once.]
When you have finished using the blender, you
always have to put the on/off switch to the '0'
position and then unplug the appliance.
Remove the glass jug by simply lifting it from
the motor base. You do not need to rotate the
glass jug to loosen it.
As we are constantly developing the function and design of our products, we reserve the right to
make changes to the product without prior warning.
In accordance with the WEEE directive, every member state must ensure that electrical and
electronic waste is collected, recovered, handled and recycled correctly. Private households in
the EU can take this kind of waste to special recycling stations free of charge.
Produced in China for ICA AB, 171 93 Solna, Sweden.
Customer contact: +46 (0)20-83 33 33 or www.ICA.se
22
TIPS:
• Do not use the appliance for more than
2 minutes at a time.
• The appliance then has to cool down so it
does not overheat.
• If you are mixing solid ingredients, cut them
into small pieces first (2–3 cm).
• If you are mixing solid ingredients with
liquids, start by pouring in a small amount of
liquid. Pour in more and more of the liquid
through the opening in the lid.
• To mix solid ingredients or very thick liquids,
we recommend using the blender in the pulse
setting, otherwise the blade might get stuck.
MOTOR BASE:
• Never immerse the motor base in water. Only
wipe the surface with a damp cloth.
SIMPLE CLEANING/RINSING OF THE
GLASS JUG:
• Empty the glass jug and fill it with water. Put
the glass jug on the motor base and turn the
switch to 'P' several times. Empty the glass
jug and rinse it until it is clean.