General Description - ICA cook&seat KP-508WGH Manual

GENERAL DESCRIPTION

Lid
➊
Handle
➋
➌ Jug
➍ Spout
➎ On/off switch
➏ Indicator
➐ Power base
➑ Contact
➒ Power cord
➓ Switch
BEFORE USING THE APPLIANCE FOR THE
FIRST TIME:
1. You must thoroughly clean all of the
blender's parts before you use it.
2. Plug the appliance into a wall socket.
ASSEMBLING THE JUG:
1. Put the rubber seal (5) onto the edge of the
blade unit (6).
2. Put the blade unit with the rubber seal onto
the jug base (7).
3. Attach the assembled jug base to the
underside of the glass jug with the safety
ring¬ and tighten it securely.
Model: KP-508WGH. Voltage: 220–240 V ~ 50 Hz.
➊
➋
➌
➍
➏
➐
➑
4. Put the measuring cup (1) onto the lid (2).
5. Put the lid onto the jug and press it down
securely.
ATTACHING THE JUG:
1. Check that the blender is switched off [the
ON/OFF switch is on '0').
2. Put the assembled glass jug with the lid
onto the motor base (8) and press it down
until it is properly attached.
TECHNICAL DATA
Power: 600 W.
➎
➒
➓
21