Advertisement
Advertisement
Table of Contents
Related Manuals for TPS OCS-TPS
Summary of Contents for TPS OCS-TPS
- Page 1 Electronic Crane Scale User’s Guide CRANE SCALE OCS-TPS...
-
Page 2: Table Of Contents
Table of contents 1. Overview………………………………………………………………………2 2. Features & Specifications………………………………………………………2 3. Keypad Operation…………………………. ………………………. …………3 4. General Scale Operations………………………………………………………4 5. Battery Charging…………………………………………………. ……………5 6. Precautions………………………………………………………………………5 7. Calibration Method……………………………………………………………. 5 8. Sub-menu Function Setup…………………………………………………….. 5 9. Displays …………………………………………. ………………………. ……6 10. Schematics………………………………………. ………………………. ……7... -
Page 3: Overview
Overview The electronic crane scale combines reliable, advanced electrical hardware with good software. Using AT-89 series micro-processor and high speed, high precision A/D conversion technology, this series of scale has a specially designed jittering compensation circuitry so they can reach steady state quickly with strong anti-interference capability. -
Page 4: Keypad Operation
Keypad Function/Operation HOLD 1.［ ］ : Press this key to set the current display to zero. Under weighing mode of operation to turn on/off the display backlighting (only applicable to LCD series) 2. ［ ］ : Press this key to change between Measured Division and Selectable Division. ]: Press this key to keep the current display, the screen will flash. - Page 5 The scale uses maintenance-free 6V/3.2AH Lead-Acid battery. When scale is with low power, it will display the following signals: a When the low power indicator light is lit. The scale needs to be charged now. However, the scale can continue to be operated for about 3 hours without charging. b.
-
Page 6: Calibration Method
Calibration Method Please do not attempt to calibrate the scale without standard weight Step Operation Display Remarks 00000 Enter the calibration procedure， needed to enter Press & Hold [ password Key to power on Press [ Key to ***** Enter password Press [ ]Key to move the digit left... - Page 7 “9,….0” to enter the sub-menu Press [ Key to add Press [ ]Key to move ***** Enter password the digit left Press[ ] to confirm Enter the alarm ON/Off setup mode. Press [ ] or [ ] key to toggle the digit. “0” is Off, “1” is “ON”...
-
Page 8: Displays
switch “0”is not to save， “1” is to save Press[ System will be restarted automatically Displays LED Display HOLD LCD Display AM PM AUTO Weighing in kg. HOLD: The current weight is kept. AUTO : Manual or Auto backlighting. When this symbol is lit, indicating the backlighting will be on during the weighing process. -
Page 9: Schematics
‘Division Conversion’ indication. When this symbol is lit, indicating the display value is at selectable division status. Stable indicator. When this symbol is lit, the weighing process is stable and customer can take record of the weight. Schematics CRANE SCALE HOLD HOLD... - Page 10 Nếu khách hàng cần sự giúp đở xin vui lòng liện hệ đường dây nóng Người Nhận Số Điện Thoại Liên Lạc Hotline (08)62.888.666 - (08) 62.999.111 Võ Hồ Thái Cường 0915.999.111 Tăng Văn Xa 0974.000.333 Tăng Thị Kim Cương 0908.444.000...
Need help?
Do you have a question about the OCS-TPS and is the answer not in the manual?
Questions and answers