Page 2
TABLE OF CONTENTS III. Power Source Illustration Low battery warning When symbol appears in the upper left hand corner of Major Parameter -----------------------(1) the LCD display, the internal battery needs to be recharged. If the battery is not recharged and the battery symbol appears, Special Remarks -----------------------(1) the scale will switch off automatically after approximately 2-3 hours of additional use.
Major Parameter III. Display Explanation Mode: HAW series, FWD series, FHW series Division Value: 1~75000 Non-linearity: ≤0.01%F.S Load cell excitation: 5V DC,5% 100mA Load cell: 350Ω Operation keypad: 10 :Low battery indication : Zero indication Display: LCD, 6 digits, green backlight :Stable indication :Negative indication Operating Temperature: 0~40℃;≤85%RH Fuse: 500mA...
Page 4
(VI) Counting function (3) The way of LCD bright Press the key to the sample size (10, 20, 50, 100, 200, 500 and 1000 pieces), put the sample number on the scale and press the key, when the scale is stable, the 10d low limit high limit display shows the present quantity on the platter.
the pan ,hit the this key to clear the display Use this key to subtract that the current weight readings is net weight. Operation V. Keyboard Function (I) Backlight Press key to choose the display backlight mode: :Use this key to select the unit weight AUTO: “Auto Backlight”...
Page 6
Press key to return the display to zero, and then press key to show “Centr” and before it disappear press key to appear “RES”, press key to recover the factory set. (IV) Pre-set Warning The weight range can be preset, if exceed the weight range; the buzzer will sound every time.
This manual is also suitable for:
Vibra haw 6Vibra haw 3Vibra haw 15Vibra haw 30Vibra haw 10Vibra haw 2...
Show all
Need help?
Do you have a question about the VIBRA HAW SERIES and is the answer not in the manual?
Questions and answers