Page 11
CV29L-F-12 Common problems solution —System Chart —Power Units Problem Solving —Display Units Problem Solving —Audio Units Problem Solving —Functional Units Problem Solving...
Page 13
Figure.1 Power Units Problem Solving In stand-by condition, Check Test point TP5 have 12V? Check TP3 have 5V,TP4 have 1.26V and TP2 have 3.3V ? Normal boot Check U5/U7/U4 power Check external power supply net After power on, Check Test point TP6 have 5V,Test point TP7 have 3.3V,Test Point TP1 have 2.5V/1.8V (TSUMV29LU is 2.5V,TSUMV59XU is...
Page 14
Figure.2 Display Unit Flickering or Black screen (black screen) (Back light on) Check the connection of Driver Board Cable connect well Change the LCD, check if it is ok Check the network output, J3 cable socket Works normal Change the circuit Check the software match RE-Upgrade...
Page 15
Figure.3 Display Unit (black screen) black screen Main board J8 No.5/6 pin Have or not 12V? Check the Inverter power supply 4pin of J8 output voltage is over 3.3V Inverter broke or Maintenance power Check power supply circuit bad wire connection...
Page 16
Figure.4 Audio Unit (no sound) No sound If Any audio signal input or amplifier power supply normal Check the Volume, MUTE settings If any signal output of J5/J7 U1(NS4263)6/11 Pin have signal input Check U6 audio input pin has the signal output Check Check Maintenance U1 &...
Page 17
Figure.5 Function Unit (ATV broke down) TV no searching /no image Check External RF signal input Check the Turner No.2 pin of U9 have 3.3V Check Tuner No. 9,10 pin of U9 Have I2C data Check No.5/6 pin of U9 have IF signal Check external circuit Check BPF\U9 direct connect of U9 is OK?
Page 18
Figure.6 Function Unit(ATV with the image but no sound) TV no sound only picture Check the sound of PC and AV Check the connect net of See “NO SOUND” BPF and U9,Check the repair guide connect net of BPF and U6(TSUMV29LU)
Page 19
Figure.7 Function Unit (PC) PC Function Check VGA Color Image not Image circuit No signal cast In the middle shakes connection U6(TSUMV29LU) VS,HS signal R.G.B input signal Stable and well works well Check VGA circuit connection OSD settings, Carry out Or input mode Check VS.HS Check VGA...
Page 20
Figure.8 Function Unit (VGA) Miss color, All no signal color cast U6(TSUMV29LU)R.G.B Input signal is normal VGA socket contact is ok Check Check VGA R.G.B The system is incorrect Input network U6(TSUMV29LU) re-set settings Power supply...
Page 21
Figure.9 Function Unit (HDMI) HDMI No image Image, Check HDMI no sound connection U6(TSUMV29LU) Check If the sound HDMI and relevant network is ok in PC See the repairs guide Check HDMI and the Check If the sound Check HDMI and “No Sound Solution”...
Page 22
Figure.10 Function Unit (YPBPR) YPBPR YPBPR No signal Color cast Y/PB/PR Check U6 input signal external circuit network and Crystal circuit...
Need help?
Do you have a question about the TF-LED15S27 and is the answer not in the manual?
Questions and answers