Table of Contents
Advertisement
BLENDING INSTRUCTIONS
IMPORTANT: Review all warnings on pages
4–5 before proceeding.
1 Plug in motor base and place on a
clean, dry, level surface such as a
worktop or table.
2 Add ingredients to the Single-Serve Cup.
DO NOT add ingredients past the MAX
LIQUID line on the cup.
3 Place the Pro Extractor Blades Assembly
on the top of the cup and turn clockwise
to seal.
4 Turn the cup upside down and install
on the motor base by aligning the tabs
on the cup with the slots on the base.
Then, rotate cup clockwise until it clicks.
Once locked in place, the programs
will illuminate and the unit will be ready
for use.
8
AU 02 8801 7666 | NZ 0800 112 660
5a If using an Auto-iQ program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop.
6 Remove the cup from the motor base
by turning it anti-clockwise and then
lifting up.
Advertisement
Table of Contents
