Blending Instructions - Ninja BN495ME Instructions Manual

BLENDING INSTRUCTIONS

1 Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
2 Place the
Pro Extractor Blades™
Assembly on the top of the cup
and turn clockwise to seal.
3 Turn cup upside down so the
bottom of the blade assembly is
flat on the worktop.
10
4 Install the cup onto the motor base
and turn clockwise to lock into
place. Once correctly locked in, the
programs will illuminate.
5 Choose your program (see
page 9 for reference). The pre-
set programs will automatically
stop the unit at the end of the
program. To pause the unit at any
time, press the active program a
second time.
6 When blending is complete, twist
the cup anti-clockwise and lift
up. DO NOT store contents in the
cup with the Pro Extractor Blades™
Assembly attached.
7 Turn cup over so blade assembly
is on top. Twist blade assembly
anti-clockwise to remove. To take
your blended contents on the go,
place the spout lid on cup and turn
clockwise to seal.
8 Unplug the unit when finished. To lift
the motor base, place your hands
underneath both sides of it and
gently pull the unit up and toward
you. Refer to the Care & Maintenance
section for storing instructions.
ninjakitchenme.com
11