Maintenance Hazards - Baumalight 3P24 Operator's Manual

2.3 Maintenance Hazards

Before servicing, park machine on a firm and
level surface, set parking brake, chock wheels,
and place a "Do Not Operate" tag on control
panel. Read and understand this manual. If you
do not understand any part of the manual, contact
Baumalight at 866-820-7603.
Always wear face and/or eye protection, safety
shoes, and other protective equipment appropriate
for the job.
Do not make unauthorized modifications. Contact
Baumalight at 866-820-7603 before you weld, cut/
drill holes, or make any other modifications.
Always use Baumalight replacement parts.
^
WARNING
Moving parts can crush and cut.
Keep clear of moving components.
Follow lockout
servicing.
^
WARNING
Crushing hazard.
Before performing inspections, service
or maintenance:
Park machine on firm, level surface.
Engage parking brake.
Turn engine off and remove key.
Place "Do Not Operate" tag on control
panel.
6
procedure before
^
WARNING
Entanglement hazard.
Keep clear of moving components.
Wear proper protective
appropriate for the job.
^
WARNING
Burn hazard.
Hot and high pressure hydraulic oil.
Allow oil to cool before servicing.
equipment