1. Manuals
  2. Brands
  3. Baumalight Manuals
  4. Grinder
  5. STUMP BLASTER 3P24
  6. Operator's manual

Baumalight 3P24 Operator's Manual

Stump grinder
Hide thumbs Also See for 3P24:
Table of Contents

Advertisement

Quick Links

Download this manual
3P24, 3P34 and 3P40 STUMP GRINDER
OPERATOR'S MANUAL
Issue Date July 2021

Advertisement

Table of Contents
loading

Related Manuals for Baumalight 3P24

Summary of Contents for Baumalight 3P24

  • Page 1 3P24, 3P34 and 3P40 STUMP GRINDER OPERATOR’S MANUAL Issue Date July 2021...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION ........................... 1 1.1 Overview ............................1 1.2 Intended Use And Foreseeable Misuse ..................1 2. SAFETY ..............................2 2.1 Safety Alert Symbol And Safety Words ..................2 2.2 Operational Hazards ........................2 Prepare for Emergencies ......................3 Replace Safety Signs ........................

  • Page 3: Introduction

    Model 3P24 has 34 teeth on a 24 in. cutter and and facing in the direction of travel. models 3P34 and 3P40 have 54 teeth on a 34 in.

  • Page 4: Safety

    2. SAFETY 2.1 Safety Alert Symbol And Safety 2.2 Operational Hazards Words You must read, understand and follow the WARNING instructions given operating unit Prevent serious injury or death. manufacturers, as well as the instructions in this manual. Read and understand this manual before The safety information in this manual is denoted by operating stump grinder.

  • Page 5: Prepare For Emergencies

    If you do not understand any part of this manual, • Lower operating speed while loading, contact Baumalight at 866-820-7603. unloading or performing heavy operations. • Keep load low and move at slow speeds on Prepare for Emergencies rough or uneven terrain. •...

  • Page 6: Avoid Powerlines & Underground Utilities

    • Balance load so weight is evenly distributed Raised Attachment and load is stable. • Use caution when operating on slopes and do WARNING not operate on excessively steep slopes. Crushing hazard. • Do not exceed load capacity of equipment. Raised, unsupported stump grinder can Avoid Powerlines &...

  • Page 7: Avoid Wood Dust Inhalation

    Protect hands and body from high pressure fluids. Stay Clear of Rotating Driveshaft If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically WARNING removed within a few hours or serious infection may result. Entanglement in a rotating driveshaft can cause serious injury or death.

  • Page 8: Maintenance Hazards

    Do not make unauthorized modifications. Contact WARNING Baumalight at 866-820-7603 before you weld, cut/ drill holes, or make any other modifications. Burn hazard. Always use Baumalight replacement parts. Hot and high pressure hydraulic oil.
  • Page 9 This page intentionally left blank.

  • Page 10: Safety Signs

    3. SAFETY SIGNS The two and four panel safety decals are pictorial A. D005365 ^ WARNING - Rotating blade and have a yellow background. The panel with a hazard. Keep back 75 m while machine triangle indicates the potential hazard. The panel is operating.
  • Page 11 C. D005262 ^ WARNING - P65 warning F. D005125 ^ WARNING - Read and understand information. safety signs on the machine and operating instructions in this manual before operating machine. WARNING: This product can expose you to chemicals including 1,3-Butadiene and lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm.

  • Page 12: Assembly

    4. Assembly 4.1 Remove Stump Grinder From Pallet WARNING Approximate weight of grinder is: 3P24 - 642 lbs (291 kg) • 3P34 - 1231 lbs (558 kg) • 3P40 - 1280 lbs (581 kg) • Stump grinder is top heavy when attached to pallet.

  • Page 13: Attach Driveshaft

    4.2 Attach Driveshaft 1. Remove four cap screws (A), washers and cover (B). 2. Remove nut and bolt from drive line. 3. Attach drive line (C) to gear box shaft (D). 4. Install nut and bolt in drive line. 5. Install cover, four washers and cap screws. 6.

  • Page 14: Driveshaft Dimension

    4.3 Driveshaft Dimension 1. Subtract machine dimension (A) from uncut To accompany the variety of 3 point hitch geometry driveshaft dimension (B). This dimension available today, the driveshaft can be too long for determines how much too long the driveshaft some machines or too short for others.

  • Page 15: Operation

    5. OPERATION 5.1 Preparation For Use WARNING Wear an approved respirator (N95 Type as a minimum). Follow local, state federal regulations. The health effects from exposure to wood dust are due to chemicals in the wood or chemical substances in the wood created by bacteria, fungi, or moulds.

  • Page 16: Pre-Operation Check List

    5.2 Pre-Operation Check List Check-mark Check these items Frequency Check the three lynch pins on the hitch to verify they are securely Each operation. fastened. Check the hydraulic fluid level to verify there is sufficient fluid in Each operation. the system. Check hydraulic lines for breaks and punctures.

  • Page 17: Machine Components

    5.3 Machine Components 5.4 Attach To Tractor A. Manual Storage Tube WARNING B. 3-Point Top Link To prevent injury or machine damage C. 3-Point Lift Pins put transmission in “Park” and check the full range of hitch for interference, D. Raise/Lower Cylinder binding or PTO separation.
  • Page 18 9. Plug in hydraulic hoses (F) to the tractor’s rear SCV’s. See your tractor Operator’s Manual. 10. Verify hydraulic hoses are clear of pinch areas. 11. Retain hydraulic hoses to top bar of hitch. Verify hoses do not interfere with drive line. 12.
  • Page 19 13. If equipped with S1050 Adapter Bracket - Remove lock pins from positions (G) and pivot S1050 adapter brackets to a comfortable operating position. Install lock pins at positions (G).

  • Page 20: Detaching Stump Grinder From Tractor

    5.5 Detaching Stump Grinder From Tractor WARNING Prevent serious injury or death caused by unexpected movement: Park tractor on a level surface. Engage tractor park brake. Disengage PTO. Shut off engine and remove key. 1. Park tractor on a level surface. 2.

  • Page 21: Transporting

    5.6 Transporting 1. Verify all reflectors and Slow Moving Vehicle 3. Raise stump grinder to fully raised position. (SMV) sign are visible. 4. Center the grinder directly behind the tractor for greater stability. WARNING 5. Verify tractor PTO is disengaged. Prevent injury and equipment damage.

  • Page 22: Adjusting Swing Speed

    5.7 Adjusting Swing Speed 5.8 Carbide Teeth Break-In 1. The swing speed of the grinder can be adjusted During the first few hours of use, avoid hitting by turning the adjustment knob (A) on the flow stones as much as possible to allow the carbide control valve.

  • Page 23: First Time User Tips

    5.9 First Time User Tips 5.10 Field Operation Before you begin, make sure the tractor is turned WARNING off and the PTO drive is disengaged. Entanglement in a rotating drive line Stand to the side of the stump grinder and observe can cause serious injury or death.
  • Page 24 WARNING Clean machine thoroughly before service or maintenance procedures. The health effects from exposure to wood dust are due to chemicals in the wood or chemical substances in the wood created by bacteria, fungi, or moulds. 1. Attach stump grinder to tractor. See Attaching Stump Grinder to Tractor in this section.
  • Page 25 8. Using the lift and swing levers to direct the WARNING stump grinder, make the first pass across the front edge of the stump, moving the cutting Never approach stump grinder before wheel from right to left in 3 - 6 in. (76 - 152 cutting wheel has come to a complete mm) passes.

  • Page 26: Service And Maintenance

    6. SERVICE And MAINTENANCE 6.1 Service WARNING WARNING Pressurized fluids can penetrate the Drilling, sawing, sanding or machining skin. wood products can expose you to wood dust, a substance known to the State of Hydraulic hoses can fail due to physical California to cause cancer.

  • Page 27: Replace Cutting Teeth

    7. Remove quick coupler and/or adapter (A) from lock nut (A) to 150 lb/ft (204 Nm) of torque. hose. Note: Parts breakdown found 8. Install replacement hose in reverse order of Baumalight’s website. www.baumalight.com removal. Note: Parts breakdown can be found on Baumalight’s website. www.baumalight.com...

  • Page 28: Adjust Slip Clutch

    6.1.3 Adjust Slip Clutch WARNING Entanglement in a rotating drive line can cause serious injury or death. Disconnect and lockout power source before adjusting or servicing. CAUTION Slip clutch may be hot. Wait for clutch to cool before adjusting or servicing. Bondioli Driveshafts 4-Disk 120 Hp 1,000 rpm OEM Part Number...

  • Page 29: Maintenance

    6.2 Maintenance Maintenance Chart General Inspection Inspect unit buildup Daily contamination (dirt, stones, etc.). Hydraulics Check hydraulic hoses and fittings for leaks. Daily Cutting Teeth Check and replace one at a time as Every 2 hours. necessary. The teeth on the outer edge of the wheel wear faster and are more prone to chipping.

  • Page 30: Every 6 Hours

    6.2.1 Every 6 Hours 6.2.2 Every 10 Hours Lubricate deflector shield pivot points every 6 Lubricate pivot pins every 10 hours of use. hours of use.

  • Page 31: Every 200 Hours

    6.2.3 Every 200 Hours 1. Park tractor and grinder on a level surface. 2. Lower grinder to the ground. 3. Place wood block under cutting wheel and lower cutting wheel to wood block. 4. Shut off engine and remove key. 5.

  • Page 32: Remove Cutting Wheel

    6.2.4 Remove Cutting Wheel Attach stump grinder to tractor (see 5.4 Attach To Tractor) or connect a suitable lifting device to stump grinder. If connected to tractor, shut off engine, remove key and place a Do Not Operate tag on control panel.

  • Page 33: Troubleshooting

    Slippage on the clutch occurs if there is more power than the unit is rated for: Model 3P24 is rated for 20-60 hp input. Model 3P34 is rated for 50-80 hp input. A bigger tractor can be used if it is idled down as this will decrease the output power of the engine.

  • Page 34: Storage

    8. STORAGE 8.1 Storing Grinder 1. Store grinder in a dry place. 2. Clean grinder thoroughly. Dirt and wood chips will draw moisture and cause rust. 3. Lubricate machine. (See Service Maintenance section.) 4. Check condition of cutting teeth. Replace as necessary.

  • Page 35: Warranty

    9. WARRANTY This product is warranted to be free of defects in materials and workmanship under normal use and service, for a period of one year from the date of purchase, when operated and maintained in accordance with the Operating and Maintenance Instructions supplied with this unit. This warranty does not cover misuse or negligence.
  • Page 36 MTB MFG INC. CORPORATE HEADQUARTERS 4575 Powell Rd., Wallenstein, Ontario Canada N0B 2S0 Phone - 519.698.9864 Toll Free - 866.820.7603 Fax - 519.698.1087 www.baumalight.com...

This manual is also suitable for:

3p343p40Wl3p34Wl3p24Wl3p40

Table of Contents