Table of Contents
Advertisement
5. OPERATION
5.1 Preparation For Use
^
WARNING
Wear an approved respirator (N95 Type
as a minimum).
Follow
local,
regulations.
The health effects from exposure to
wood dust are due to chemicals in the
wood or chemical substances in the
wood created by bacteria, fungi, or
moulds.
Although the Stump Grinder has been carefully
inspected and checked prior to shipment from
manufacturer, it is recommended that the unit be
thoroughly inspected.
Check all bolts for tightness and remove all shipping
tags, bags, skids, and blocking. Check swing
frame to ensure that it is free from obstruction and
can operate smoothly without binding.
Remove any masking materials affixed during
painting. Inspect the tractor and any accessory
equipment to verify that nameplates and all safety
warning, caution signs and decals provided with
the equipment are in place and clearly visible.
Verify the three linch pins are securely fastened.
Visually inspect the unit before each start up.
Check for loose or missing parts and any damage
that may have occurred during moving or shipping.
Review all tractor pre-start instructions, and ensure
that all recommended steps and procedures have
been followed. Never bar over the rotor, This could
cause damage and result in personal injury or
equipment damage.
NOTE: Always keep the weight of the machine in
mind. Never position body in line of impact.
state
and
federal
13
Advertisement
Table of Contents
