Product Troubleshooting - Accucold AIWD160 User Manual

Troubleshooting
① When Error occurs, the front use button (ICE-WATER-ICE & WATER) of the door lights alternately to
the left and right. Restart after action.
② When the button is lit alternately to the left and right, open the door and press the bottom setting
button of the control buttons, Error display will appear.
Display Error type
Er01 Evaporator
temperature
error
Er03 Evaporator
temperature
error
Er06 Temperature
sensor error
Er07 Temperature
Sensor Error
Er13
High
pressure
switch error
Er14 High
pressure
switch error
Er15 Water
supply error
Causes
When the Evaporator
temperature is 0 ° C or
more after 30 minutes
passed during the ice
making
When the Evaporator
temperature is over -5 °
C after 30 minutes
passed
Displayed when
temperature sensor is open
or shorted.
Occurs when the
temperature sensor of COND
OUT
(F11) is broken
(All operations will be stopped
and
the "water" dispensing mode
will be activated)
Condenser dust, fan
motor failure, cold cycle
abnormality, etc.
Occurs when High
pressure switch is OPEN 3
times or more
When water level is not
detected by the water
level sensor due to no
water
supply for 120 seconds.
Action Release
Check refrigerant Resupply
leakage power
Check sensor and after
attachment
resolving
abnormality
cooling
problem
Check refrigerant Resupply
leakage power
Check sensor and after
attachment resolving
abnormality
cooling
problem
Check sensor and Start operation
attachment after
abnormality sensor
part repair
Check sensor Start
and operation
attachment after sensor
abnormality
part
repair
Remove dust, Automatic
Check Fan motor return after
Check for action
abnormal cold
cycle
Contact service Start
representative operation
after action
Water supply Start
pressure check operation
Water level after action
sensor check
26
Operation
Stop ice making
Keep on
ice making
Stop ice making
Stop ice
making
Stop
compressor.
Stop motor
after operating
10
seconds.
Stop
compressor.
Stop motor
after operating
10
seconds.
Stop ice making