Table of Contents
Advertisement
TABLE TOP ICE & WATER DISPENSER
Write Model and Serial Numbers here:
Model No.: _____________________
Ser. No.: _______________________
Models AIWD282
User's Manual
BEFORE USE, PLEASE READ AND FOLLOW
ALL SAFETY RULES AND OPERATING INSTRUCTIONS
SCIWD282
FELIX STORCH, INC.
Summit Appliance Division
An ISO 9001:2015 registered company
770 Garrison Avenue
0
Bronx, New York 10474
Advertisement
Table of Contents
Related Manuals for Accucold AIWD282
Summary of Contents for Accucold AIWD282
- Page 1 TABLE TOP ICE & WATER DISPENSER Models AIWD282 SCIWD282 User’s Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Write Model and Serial Numbers here: FELIX STORCH, INC. Summit Appliance Division Model No.: _____________________ An ISO 9001:2015 registered company 770 Garrison Avenue Ser.
-
Page 2: Table Of Contents
Table of Contents Important Safeguards…………………………………………………………………….. 2-4 Product Specification …….………………………………………………………..………5-7 Product Rating……………………………………………………………………………5 Wiring Diagram…………….……………………………………………………….…….5 Location of Parts…..……..…………................6 Unpacking, etc……………….……………………………………………..………………..7 Product Installation…….………………………………………………………..……………7-11 General Instructions……….…………………………………………………….….…….7 Requirements for plumbing..………………………………………………….…….……8 Water Quality……….……….……………………………………………..………….……8 Requirements for Power Supply………………………………………………..….…….9 Panel disassembly method……………………………………………..………………..10 Connection method for water supply and drainage……………………………..……..11 How to start the product………………………………………………………..…………..12-14 Button operation……………..…..…………………………………………..…………..12 Function button description (FND display window)…………………………………..13... -
Page 3: Important Safeguards
Your safety and the safety of others are very important We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can injure or kill you and others. - Page 4 Before the ice/water dispenser is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. Accucold® by Summit Appliance strongly recommends that you have a professional install your new machine. The warranty may be affected or voided by an incorrect installation.
- Page 5 • Make certain that hoses are not pinched, kinked or damaged during installation. • Check for leaks after water line is connected. • Although the unit has been tested and cleaned at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.
-
Page 6: Product Specification
Product Specifications WATER/ICE DISPENSER Model AIWD282/SCIWD282 AC Supply Voltage: 115 V 60 Hz, 1 PH Refrigerant: R404A Amount of refrigerant: 11.29 oz Design Pressure: High Side 360 psig Design Pressure: Low Side 190 psig Compressor LRA 40 A Fan Motor 115 V, 0.7 A... -
Page 7: Location Of Parts
Location of Parts Front Top/Bottom... -
Page 8: Unpacking, Etc
Unpacking, etc. • After removing the packing materials, check the appearance of the dispenser for possible defects or irregularity. If the product shows any irregularity in its appearance, contact the distributor. • All the packing materials (straps, box, Styrofoam, wood, etc.) should never be left within the reach of children and should be disposed of according to local regulations. -
Page 9: Requirements For Plumbing
Requirements for plumbing Plan the arrangement of the water supply pipes. Connect a 1/4" diameter copper cable with the tap water pipe. Install a shutoff valve between the tap water pipe and the product so that the user can operate the valve. Do not install the shutoff valve at the back of the product. -
Page 10: Requirements For Power Supply
Requirements for power supply 120VAC, 60Hz, 15-amp circuit breaker and electric power are required. A separate circuit is required for grounding. The power cord of the product should be inserted into a suitable 3-prong grounding-type socket. Important Information: A Ground Fault Circuit Interrupter (GFCI) is not recommended because it could cause the operation of the product to stop. -
Page 11: Panel Disassembly Method
Panel Disassembly Method . Upper panel: Open the front door and lift the upper panel, then the back magnets will be separated and disassembled. 2. Front panel: Remove the lower set screws of the drain box, then loosen the set screws on the top of the front panel and pull out the front panel taking both sides. -
Page 12: Connection Method For Water Supply And Drainage
Connection to water supply and drainage [Connection of water and drainage hoses] Division Proper water temperature Water pressure Hose to be used ICE MAKING water supply 50 ~ 90 14.22 ~ 71.12 psi OD ø6.35 PE TUBE ICE MAKING drainage ID ø20 hose •... -
Page 13: How To Start The Product
STARTING THE PRODUCT 1) Water supply hose protection --Do not place heavy objects on the water supply hose leading to the water supply, or keep the hose from treading. 2) Proper water pressure, water temperature, ambient temperature Water pressure: 14.22 ~ 71.12 psi Water temperature: 50 ~ 90 Ambient temperature: 50 ~ 100... -
Page 14: Function Button Description (Fnd Display Window)
Function Button Description (FND Display Window) ① SOLENOID Maximum operating time adjustment function. F. 1 Maximum Discharge Time ②3 digits: 20 seconds (5 seconds ~ 30 seconds, Set Unit of one second) ①This function can be entered in "OFF" state of ICE MAKING-OFF-WASH F. -
Page 15: Three Drainage Functions (Forced Drainage, Automatic Draining, Water Drainage)
Three Draining Functions (Forced Draining, Automatic Draining, Water Draining) Must be implemented to prevent freezing in winter storage. Use this function for Forced drainage cleaning the inside. function - Turn on the power switch and press the "DOWN + SET" button simultaneously for 3 seconds with any signal on the FND display. -
Page 16: Product Maintenance
Required Actions to prevent frost (Water Removal in Water Tank and Evaporator) • If the ambient temperature falls below 0°C/32 F, water will freeze inside the machine and machine operation will be impossible. • If you do not use for a long period of time in winter, be sure to completely remove the ice making water inside the body by following the instructions below. -
Page 17: Maintenance Schedule
Maintenance Schedule ※ The following maintenance schedule is guideline. ※ Maintenance and repair should be done more frequently according to water quality, equipment usage environment and local hygiene regulations. Inspection Area Contents Schedule Daily Chute 1. Clean the ice scoops with a neutral detergent. 2. -
Page 18: Cautions When Cleaning Exterior Panel (Stainless Steel)
Caution when cleaning exterior panel (stainless steel) How to clean the rust state Stain type initial rust Since the initial rusted stainless steel surface itself is only slightly affected by the stain, it can be returned to almost the original surface by selecting the neutral detergent or a commercially available cleaning solution. -
Page 19: How To Clean And Disinfect
How to Clean and Disinfect The dispenser should be cleaned and disinfected at least twice a year. More frequent cleaning and disinfection may be required. Please observe the following points. • Do not use ammonia-type detergents to prevent personal injury or damage to the ice maker. •... - Page 20 Disinfection Dilute 10 L of warm water and 400 mL of 5.25% sodium hypochlorite solution (bleach). wash (※ Dilution ratio may vary depending on the solution manufacturer, please refer to the solution manual). If this is the minimum amount to be used, use more washing solution. ※...
-
Page 21: Product Troubleshooting
Troubleshooting ① When Error occurs, the front use button (ICE-WATER-ICE & WATER) of the door lights alternately to the left and right. Restart after action. ② When the button is lit alternately to the left and right, open the door and press the bottom setting button of the control buttons, Error display will appear. - Page 22 Before Requesting Service If the operating condition of the machine is not good, please refer to the table below to identify the issue. If you still require assistance, contact your dealer or service center. For expedited service, it is best to have the following information on hand: model name, serial number, name of dealer, and date of purchase.
-
Page 23: Product Warranty
Note: Nickel is a component in all stainless steel and some other metal components. FELIX STORCH, INC. 770 Garrison Avenue For parts and accessory ordering, Bronx, NY10474 Phone: (718) 893-3900 troubleshooting and helpful hints, Fax: (844) 478-8799 visit:www.summitappliance.com/support www.accucold.com Printed in Korea...