Table of Contents
Advertisement
TABLETOP ICE & WATER DISPENSER
Write Model and Serial Numbers here:
Model No.:
Ser. No.:
Models AIWD282
SCIWD282
User's Manual
BEFORE USE, PLEASE READ AND FOLLOW
ALL SAFETY RULES AND OPERATING INSTRUCTIONS
AIWD160
AIWD450
FELIX STORCH, INC.
Summit Appliance Division
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, New York 10474
0
Advertisement
Table of Contents
Related Manuals for Accucold AIWD160
Summary of Contents for Accucold AIWD160
- Page 1 TABLETOP ICE & WATER DISPENSER Models AIWD282 AIWD160 SCIWD282 AIWD450 User’s Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Write Model and Serial Numbers here: FELIX STORCH, INC. Summit Appliance Division Model No.: An ISO 9001:2015 registered company 770 Garrison Avenue Ser.
-
Page 2: Table Of Contents
Table of Contents Important Safeguards ..................... 3-5 Product Specification ....................6-9 Product Rating… ....................6 Location of Parts… ....................7-9 Unpacking, etc......................10 Product Installation ..................... 10-14 General Instructions ....................10 Requirements for plumbing ..................11 Water Quality… ....................... 11 Requirements for Power Supply................ -
Page 3: Important Safeguards
Your safety and the safety of others are very important We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can injure or kill you and others. - Page 4 Before the ice/water dispenser is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. Accucold® by Summit Appliance strongly recommends that you have a professional install your new machine. The warranty may be affected or voided by an incorrect installation.
- Page 5 • Make certain that hoses are not pinched, kinked or damaged during installation. • Check for leaks after water line is connected. • Although the unit has been tested and cleaned at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.
-
Page 6: Product Specification
Product Specifications WATER/ICE DISPENSER Model AIWD282/SCIWD282 AIWD450 AIWD160 AC Supply Voltage: 115 V 60 Hz, 1 PH 115 V 60 Hz, 1 PH 115 V 60 Hz, 1 PH Refrigerant: R404A R404A R134A Amount of refrigerant: 11.29 oz 14.10oz 6.35 oz... -
Page 7: Location Of Parts
Location of Parts (AIWD282/SCIWD282) Front Top/Bottom... - Page 8 Location of Parts (AIWD450) Front Rear Bottom...
- Page 9 Location of Parts (AIWD160) Front Rear Bottom...
-
Page 10: Unpacking, Etc
Unpacking, etc. • After removing the packing materials, check the appearance of the dispenser for possible defects or irregularities. If the product shows any irregularity in its appearance, contact the distributor. • All the packing materials (straps, box, Styrofoam, wood, etc.) should never be left within the reach of children and should be disposed of according to local regulations. -
Page 11: Requirements For Plumbing
Requirements for plumbing Plan the arrangement of the water supply pipes. Connect a 1/4" diameter copper cable with the tap water pipe. Install a shutoff valve between the tap water pipe and the product so that the user can operate the valve. Do not install the shutoff valve at the back of the product. -
Page 12: Requirements For Power Supply
Requirements for power supply 120VAC, 60Hz, 15-amp circuit breaker and electric power are required. A separate circuit is required for grounding. The power cord of the product should be inserted into a suitable 3-prong grounding-type socket. Important Information: A Ground Fault Circuit Interrupter (GFCI) is not recommended because it could cause the operation of the product to stop. -
Page 13: Panel Disassembly Method
Panel Disassembly Method Upper panel: Open the front door and lift the upper panel, then the back magnets will be separated and disassembled. 2. Front panel: Remove the lower set screws of the drain box, then loosen the set screws on the top of the front panel and pull out the front panel taking both sides. -
Page 14: Connection Method For Water Supply And Drainage
Connection to water supply and drainage [Connection of water and drainage hoses] Division Proper water temperature Water pressure Hose to be used 50 ~ 90 ICE MAKING water supply 14.22 ~ 71.12 psi OD ø6.35 20 ~ 80 psi PE TUBE NPT 3/8”... -
Page 15: How To Start The Product
STARTING THE PRODUCT 1) Water supply hose protection --Do not place heavy objects on the water supply hose leading to the water supply, or keep the hose from treading. 2) Proper water pressure, water temperature, ambient temperature 3) Please connect only the water you can drink. Power connection - connect the dispenser to a dedicated outlet. -
Page 16: Function Button Description (Fnd Display Window)
Function Button Description (FND Display Window) F. 1 Maximum Discharge ① SOLENOID Maximum operating time adjustment function. Time ②3 digits: 20 seconds (5 seconds ~ 30 seconds, Set Unit of one second) F. 2 Complete removal of ①This function can be entered in "OFF" state of ICE MAKING-OFF-WASH ice in the reservoir switch. -
Page 17: Three Drainage Functions (Forced Drainage, Automatic Draining, Water Drainage)
Three Draining Functions (Forced Draining, Automatic Draining, Water Draining) Must be implemented to prevent freezing in winter storage. Use this function for Forced drainage cleaning the inside. function - Turn on the power switch and press the "DOWN + SET" button simultaneously for 3 seconds with any signal on the FND display. -
Page 18: Product Maintenance
Actions required to prevent frost (Water Removal in Water Tank and Evaporator) • If the ambient temperature falls below 0°C/32 F, water will freeze inside the machine and machine operation will be impossible. • If not use in for a long period of time in the winter, be sure to completely remove the water inside the body by following the instructions below. -
Page 19: Maintenance, Repair, And Disinfection
Maintenance, repair, and disinfection ※ Please keep the product according to the instruction manual and label provided. ● Be sure to have a qualified service technician service the product. ● To reduce the risk of electric shock, do not touch or disassemble the parts of the ice maker. ●... -
Page 20: Maintenance Schedule
1. Inspect for oil marks, loose components, tightening parts and wires. Upper bearing 1. Check that 0.5mm (0.02mm for AIWD160 model) round bar or pin gauge (or (Ice exit head) clearance gauge) is inserted into auger and bearing clearance, and replace all upper... -
Page 21: Cautions When Cleaning Exterior Panel (Stainless Steel)
Caution when cleaning exterior panel (stainless steel) How to clean the rust state Stain type initial rust Since the initial rusted stainless steel surface itself is only slightly affected by the stain, it can be returned to almost the original surface by selecting the neutral detergent or a commercially available cleaning solution. -
Page 22: How To Clean And Disinfect
How to Clean and Disinfect The dispenser should be cleaned and disinfected at least twice a year. More frequent cleaning and disinfection may be required. Please observe the following points. • Do not use ammonia-type detergents to prevent personal injury or damage to the ice maker. •... - Page 23 Dilute 10 L of warm water and 400 mL of 5.25% sodium hypochlorite solution (bleach). Disinfection (※ Dilution ratio may vary depending on the solution manufacturer, please refer to the wash solution manual). If this is the minimum amount to be used, use more washing solution. ※...
-
Page 24: Circuits Diagram
Circuit Diagrams AIWD282 SCIWD282 AIWD450... - Page 25 Circuit Diagrams AIWD160...
-
Page 26: Product Troubleshooting
Troubleshooting ① When Error occurs, the front use button (ICE-WATER-ICE & WATER) of the door lights alternately to the left and right. Restart after action. ② When the button is lit alternately to the left and right, open the door and press the bottom setting button of the control buttons, Error display will appear. - Page 27 Er16 Water level At the start of ice making, Replacement of Start Stop ice making sensor when the upper and lower Water Level operation defect limits are not detected by Sensor after action the water level sensor for 60 seconds Er20 Stop Cover error...
- Page 28 NOTES...
-
Page 29: Before Requesting Service
Before Requesting Service If the operating condition of the machine is not good, please refer to the table below to identify the issue. If you still require assistance, contact your dealer or service center. For expedited service, it is best to have the following information on hand: model name, serial number, name of dealer, and date of purchase. -
Page 30: Product Warranty
Note: Nickel is a component in all stainless steel and some other metal components. FELIX STORCH, INC. 770 Garrison Avenue For parts and accessory ordering, Bronx, NY10474 Phone: (718) 893-3900 troubleshooting and helpful hints, Fax: (844) 478-8799 visit:www.summitappliance.com/support www.accucold.com Printed in Korea...