NETGEAR WAX630 User Manual page 92

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
To change the channel width for a radio:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic > Wireless Settings.
The Wireless Settings page displays.
5. From the Channel Width menu for the radio, select one of the following settings.
• 20 MHz: This is the default setting for the 2.4 GHz radio.
• 40 MHz: This is the default settings for a 5 GHz radio.
• 80 MHz: This selection is available only for a 5 GHz radio.
• Dynamic 20 / 40 MHz. This selection is available only for the 2.4 GHz radio.
• Dynamic 20 / 40 / 80 MHz. This selection is available only for a 5 GHz radio.
6. Click the Apply button.
A warning pop-up window displays.
7. Click the OK button.
The pop-up window closes and your settings are saved. The radio or radios restart
and WiFi clients might need to reconnect.
Manage the Basic Radio
Features
92 User Manual