Table of Contents
Advertisement
Push in the detergent drawer.
4.
Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press inicio/pausa + carga.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
Press inicio/pausa + carga.
1.
Press termin.
2.
the display indicates the desired
"Ready in" time.
Press inicio/pausa + carga.
3.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press inicio/
pausa + carga.
To resume the programme, after
3.
the desired soaking time, press
inicio/pausa + carga.
repeatedly until
Adding laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press inicio/pausa + carga.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→ "Display", Page 26
Add or remove laundry.
2.
Close the door.
3.
Press inicio/pausa + carga.
4.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press inicio/pausa + carga.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high: Start
the
or
Remove the laundry.
3.
Resuming the programme when
the programme status is Rinse
Hold
Set the
or
1.
Press inicio/pausa + carga.
2.
Basic operation en
programme.
programme.
39
Advertisement
Table of Contents
