Table of Contents
Advertisement
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Make sure that the impeller in the
3.
drain pump can be rotated.
Insert the pump cap and screw it
4.
on.
90°
The handle on the pump cap must
be in a vertical position.
Install the base panel.
5.
Cleaning and servicing en
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
after you have emptied the drain
pump.
Turn on the tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Start the
programme.
5.
Cleaning the water outlet hose at
the siphon
If the water outlet hose at the siphon
is dirty or the detergent solution is
not being pumped out, you must
clean these.
Switch off the appliance.
1.
Disconnect the appliance's mains
2.
plug from the power supply.
Loosen the hose clamp and care-
3.
fully remove the water outlet hose.
programme
45
Advertisement
Table of Contents
